ROAD TEST
Check before Engine Is Started
1.CHECK CVT INDICATOR LAMP
- Park vehicle on flat surface.
- Move selector lever to "P" position.
- Turn ignition switch OFF. Wait at least 5 seconds.
- Turn ignition switch ON. (Do not start engine.) Does shift position indicator come on for about 2 seconds?
YES >> 1. Turn ignition switch OFF.
- Perform self-diagnosis and note NG items. Refer to See: Scan Tool Testing and Procedures\CVT RE0F09B\CONSULT-III Function (Transmission).
- Go to See: Check At Idle. NO >> Stop "Road Test". Refer to See: Symptom Related Diagnostic Procedures\CVT RE0F09B.
|
