SPECIAL TOOL(S)
REMOVAL
- Remove the center console; refer to Console.
- Disconnect the front radio antenna lead-in cable from the rear radio antenna lead-in cable.
- Remove the pushpins and the trunk scuff plate.
- Remove the pushpins and the trunk side trim panel.
- Disconnect the radio antenna lead-in cable.
- Remove the front seat; refer to Seats.
- Remove the anti-lock control module; refer to Antilock Brake System.
- Remove the door scuff plate by pulling upward.
- Remove the quarter trim panel.
- Use Safety Belt Bolt Bit to loosen the front safety belt lower anchor bolt.
NOTE : Do not attempt to remove the front safety belt lower anchor bolt from the front safety belt anchor; it is part of the assembly.
- Position the carpet out of the way.
- Remove the rear radio antenna lead-in cable.
1 |
Remove the rear radio antenna lead-in cable from the clips. |
2 |
Remove the rear radio antenna lead-in cable. |
INSTALLATION
- To install, reverse the removal procedure.
|