Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Instrument Panel, Gauges and Warning Indicators » Fuel Gauge » Service and Repair » Instrument Cluster Disassembly and Assembly  
 
 
  Instrument Cluster Disassembly and Assembly  
 

DISASSEMBLY

  

  1. Remove the four screws and the instrument cluster mask and lens.

  

  1. Remove the fuel/temp gauge.

CAUTION : Handle gauges and components with care to avoid possible damage.

NOTE : Make no attempt to adjust the needle. Remove the fuel/temp gauge.

  

  1. Remove the speedometer.

  

  1. Remove the tachometer.

  

  1. Depress the tang and remove the instrument cluster gauge amplifier from the rear of the instrument cluster.

  

  1. Remove the miniature bulbs.

  

  1. Remove all the gauge contact clips from the rear of the instrument cluster by compressing the clip ends together and pulling the clips out by hand. Discard the clips.

CAUTION : When removing the gauge contact clips be careful not to damage the instrument cluster printed circuit.

  1. Carefully remove the instrument cluster printed circuit.

ASSEMBLY

  1. To assemble, reverse the disassembly procedure.

NOTE : New gauge contact clips must be used for assembly.