Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Engine, Cooling and Exhaust » Cooling System » Temperature Sensor (Gauge) » Service and Repair  
 
 
  Service and Repair  
 

Sender Unit-Water Temperature Indicator

  

  1. Drain the cooling system.

View 151-2 (Part 2)
  

Location

  

  1. Disconnect the connector from the water temperature indicator sender unit.

  

  1. Remove the water temperature indicator sender unit.

Installation

  1. To install, reverse the removal procedure.

  

  1. Tighten the water temperature indicator sender unit.
  2. Fill the cooling system.
  3. Start the engine and check all hoses and connections for leaks. Allow the engine to warm up so that the water thermostat opens.
  4. Stop the engine. Top off the coolant recovery reservoir as necessary to maintain minimum cold fill level.