REMOVAL
- Fold down the rear seat back assembly.
- Remove the four rear seat back Outer pivot bolts (two on each side) and remove the rear seat back.
- Place the seat back on a clean workbench.
- Remove the two rear seat back pivot bolts and brackets (one on each side).
- Position the rear seat back latches in the locked position.
- Unhook the retainers.
- Open the child safety seat.
- Remove the child safety seat insert.
- Remove the child safety seat back panel.
1 |
Remove the pushpins. |
2 |
Remove the child safety seat back panel. |
- Remove the staples.
- Invert the rear seat trim cover.
- Remove the rear seat back latch covers.
1 |
Remove the screws. |
2 |
Remove the rear seat back latch covers. |
- Remove the rear seat back latches.
1 |
Remove the bolts. |
2 |
Remove the rear seat back latches. |
- Disconnect the seat back latches from the seat back release knobs.
INSTALLATION
- Install the rear seat back latches.
1 |
Connect the seat back latches to the seat back release knobs. |
2 |
Install the bolts. |
- Install the rear seat back latch covers.
1 |
Position the rear seat back latch covers. |
2 |
Install the screws. |
- Invert the rear seat trim cover.
- Install the child safety seat back panel.
1 |
Position the child safety seat back panel. |
2 |
Install the pushpins. |
NOTE : Install the child safety seat pushpins through the holes in the rear seat back trim cover plastic flaps.
- Install the child safety seat back trim.
- Close the child safety seat.
- Hook the retainers.
- Position the two rear seat hinges and install the rear seat back pivot bolts (one each side) to the seat back.
- Install the rear seat back and install the four rear seat back outer pivot bolts (two each side).
- Position the rear seat back assembly in the upright position.
|