Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Powertrain Management » Computers and Control Systems » Information Bus » Service and Repair  
 
 
  Service and Repair  
 

COMMUNICATION CIRCUIT WIRING REPAIR

Heat Gun
  

SPECIAL TOOL(S)

  1. Disconnect the battery ground cable.

  

  1. Strip the wires.

  

  1. Solder the wires.
1 Install the heat shrink tube.
2 Twist the wires together.
3 Solder the wires together.

NOTE : Use Rosin Core Mildly Activated (RMA) solder, not acid core solder.

  

  1. Bend the wires back in a straight line.

NOTE : Wait for the solder to cool before moving the wires.

  

  1. Position the (A) heat shrink tube over the (B) wire repair. Overlap the beat shrink tube on both wires.

  

  1. Use the heat gun to heat the repaired area until adhesive flows out both ends of the heat shrink tube.
  2. Reconnect the battery ground cable.