Transaxle Support Insulator -Lower, Front
Special Tool(s)
Removal
- Install Three-Bar Engine Support.
- Raise and support the vehicle.
- Remove the crossmember.
- Remove the bolts.
- Remove the crossmember.
- Remove the splash shield bolts from the transmission support crossmember.
- NOTE: Disconnect the A/C line from the retainer located on the front of the transmission support crossmember.
Remove the transmission support crossmember.
- Remove the transmission support crossmember bolts and nuts.
- Remove the LH front engine support insulator nuts.
- Remove the transmission insulator nuts.
- Remove lower front transmission isolator.
- Remove the through bolt.
- Remove the lower front support isolator.
Installation
- To install, reverse the removal procedure.
|