Attach a rubber drain hose to the front disc brake caliper bleeder screw and submerge the free end of the hose in a container partially filled with clean brake fluid.
Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.
CAUTION: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
Loosen the front disc brake caliper bleeder screw until a stream of brake fluid comes out. Have an assistant maintain pressure on the brake pedal while tightening the front disc brake caliper bleeder screw.
1
Repeat until clear, bubble-free fluid flows.
Tighten the front disc brake caliper bleeder screw.
