- Turn on the tester power by pressing ON/OFF. The tester will beep and the LCD display will appear.
- Select 1=BATTERY TEST.
NOTE: Use selection 2 CHRGD BATT TEST only after the battery has been fully charged according to manufacturer instructions.
- Connect the test leads to the battery terminals.
- Select 1=CCA.
NOTE: Only use selection 2=MCA/CA when testing a marine battery.
- Enter the battery CCA and press GO.
NOTE: Always test the battery at the O.E.M. Cold Cranking Amps (CCA) rating. The CCA rating can usually be found on the battery label.
- After the SBT completes testing, read the results.
- GOOD - The battery is good.
- GOOD, LOW CHARGE - Recharge the battery.
- BAD - Replace the battery.
- CHARGE RETEST - Charge the battery according to manufacturer's instructions and retest using the CHRGD BATT TEST function. When using this option the CHARGE RETEST result will not be available.
|