REMOVAL
- Disconnect the battery ground cable.
- Remove the LH and RH front door scuff plates.
- Remove the LH and RH rear door scuff plates.
- Remove the three pin-type retainers from each cowl side trim panel and remove the panels.
- Remove the front and rear seam welts.
- Remove both roof side inner front mouldings.
- Remove the upper safety belt guide bolt cover.
- Remove the upper safety belt guide nut.
- Remove the center body pillar inside lower finish panel.
- Remove the center body pillar inside upper finish panel.
- Remove the quarter window trim panel.
- Remove the screws and the inside visors.
- Remove the screws and the visor arm clips.
- Remove the coat hook.
1 |
Open the coat hook screw over. |
2 |
Remove the screws. |
3 |
Remove the coat hook. |
- Remove the interior lamp.
- Remove the pin-type retainers from the roof headlining.
- Remove the retainer clip located near the RH inside visor bracket.
- Remove the pushpin located near the interior lamp.
- Remove the roof headlining.
INSTALLATION
- To install, reverse the removal procedure.
|