REMOVAL
- Remove the windshield wiper pivot arms.
- Raise and support the hood.
- Remove the Cowl top vent grille.
- Remove the (A) five center Cowl top vent grille retainers and screws, and the (B) two outer Cowl top vent grille retainers, screws and washers.
- Remove the pushpins from the LH air distribution flange baffle.
- Remove the pushpins from the RH air distribution flange baffle.
- Lift the Clip up and off the windshield wiper mounting arm and pivot shaft.
- Slide the windshield wiper mounting arm and pivot shaft off the windshield wiper motor.
- Remove the windshield wiper mounting arm and pivot shaft screws.
- Remove the windshield wiper mounting arm and pivot shaft by pulling out through the RH air distribution flange baffle opening.
INSTALLATION
- To install, reverse the removal procedure.
- If necessary, adjust the windshield wiper pivot arms and blades.
|