Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Cruise Control » Cruise Control Servo » Service and Repair  
 
 
  Service and Repair  
 

REMOVAL

  1. Disconnect the battery ground cable.

  

  1. Disconnect the speed control actuator cable from the throttle control lever.
1 Disconnect the speed control actuator cable end from the throttle control lever.
2 Disengage the speed control actuator cable sleeve from the retainer.
3 Remove the retainer.

  

  1. Disconnect the speed control servo electrical connector.

  

  1. Remove the speed control actuator cable cap.
1 Depress the speed control actuator cable cap retaining tab.
2 Rotate the speed control actuator cable cap counterclockwise.

  

  1. Remove the speed control actuator cable.
    • Move the spring tab away from the speed control cable end to release the cable from the actuator.

  

  1. Remove the speed control servo.
1 Remove the bolts.
2 Remove the speed control servo.

INSTALLATION

  

  

  1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.