Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Restraints and Safety Systems » Repairs and Inspections Required After a Collision » Service and Repair » Safety Belt Procedure After A Collision  
 
 
  Safety Belt Procedure After A Collision  
 

SAFETY BELT PROCEDURE AFTER A COLLISION

WARNING: All safety belt assemblies including retractors, buckles, front seat belt buckle support assemblies (slide bar), shoulder belt height adjusters, child safety seat tether attachments (if equipped), and attaching hardware should be inspected after any collision. New belt assemblies should be installed unless a qualified technician finds the assemblies show no damage and operate correctly. Belt assemblies not in use during a collision should also be inspected and replaced if either damage or incorrect operation is noted.

NOTE: Safety belt assemblies should be periodically inspected to make sure they have not become damaged and that they remain in correct operating condition, particularly if they have been subjected to severe stress.

Before installing the new safety belt assembly, the safety belt attaching areas must be inspected for damage and distortion. If the attaching points are damaged and distorted, the sheet metal must be reworked back to its original shape and structural integrity.

Install the new safety belt(s) using the appropriate instructions. Perform the Functional Test.