Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Body and Frame » Seats » Seat Latch » Service and Repair » Rear Seat Latch » With Integral Child Safety Seat  
 
 
  With Integral Child Safety Seat  
 

REMOVAL

  1. Fold down the rear seat back assembly.

  

  1. Remove the four rear seat back Outer pivot bolts (two on each side) and remove the rear seat back.
  2. Place the seat back on a clean workbench.

  

  1. Remove the two rear seat back pivot bolts and brackets (one on each side).

  

  1. Position the rear seat back latches in the locked position.

  

  1. Unhook the retainers.

  

  1. Open the child safety seat.

  

  1. Remove the child safety seat insert.

  

  1. Remove the child safety seat back panel.
1 Remove the pushpins.
2 Remove the child safety seat back panel.

  

  1. Remove the staples.

  

  1. Invert the rear seat trim cover.

  

  1. Remove the rear seat back latch covers.
1 Remove the screws.
2 Remove the rear seat back latch covers.

  

  1. Remove the rear seat back latches.
1 Remove the bolts.
2 Remove the rear seat back latches.
  • Disconnect the seat back latches from the seat back release knobs.

INSTALLATION

  

  1. Install the rear seat back latches.
1 Connect the seat back latches to the seat back release knobs.
2 Install the bolts.

  

  1. Install the rear seat back latch covers.
1 Position the rear seat back latch covers.
2 Install the screws.

  

  1. Invert the rear seat trim cover.

  

  1. Install the child safety seat back panel.
1 Position the child safety seat back panel.
2 Install the pushpins.

NOTE : Install the child safety seat pushpins through the holes in the rear seat back trim cover plastic flaps.

  

  1. Install the child safety seat back trim.

  

  1. Close the child safety seat.

  

  1. Hook the retainers.

  

  1. Position the two rear seat hinges and install the rear seat back pivot bolts (one each side) to the seat back.

  

  1. Install the rear seat back and install the four rear seat back outer pivot bolts (two each side).
  2. Position the rear seat back assembly in the upright position.