REMOVAL
- Disconnect the accelerator cable from the throttle control lever and the accelerator cable bracket.
1 |
Disconnect the cable housing from the accelerator cable bracket. |
2 |
Disconnect the accelerator cable end from the throttle control lever. |
3 |
Position the accelerator cable aside. |
- Remove the accelerator cable retaining clips.
- Remove the (A) bolts and lower the (B) accelerator pedal and shaft.
- Disconnect the accelerator cable from the accelerator pedal and shaft.
1 |
Squeeze the cable end locking grommet tabs. |
2 |
Disconnect the accelerator cable. |
3 |
Remove the accelerator pedal and shaft. |
- Squeeze the accelerator cable lock tabs and pull the accelerator cable out of the bulkhead.
INSTALLATION
- To install, reverse the removal procedure.
- Adjust the accelerator cable; refer to Cable Adjustment. See: Adjustments
|