Removal

1. Remove the multi-function switch.

2. Disconnect the ignition switch electrical connector.

3. Remove the (A) bolt and position the (B) bracket and ignition/shifter interlock cable aside.

4. Groove the heads of the break-away bolts with a hammer and chisel.

5. Remove the (A) break-away bolts, the (B) ignition switch lock cylinder, and the (C) bracket.

• Discard the break-away bolts.

Installation

1. Position the ignition switch lock cylinder and bracket and loosely install the two new break-away bolts.

• Tighten the bolts only enough to hold the ignition switch lock cylinder in place.
• With the key in the ignition, verify the operation of the ignition switch lock cylinder.
• If necessary, reposition the ignition switch lock cylinder until it operates properly.

2. Tighten the ignition switch lock cylinder bracket break-away bolts until the bolt heads break off.

3. Install the ignition/shifter interlock cable and the mounting bracket bolt.

4. Connect the ignition switch electrical connector.
5. Install the multi-function switch.
6. Inspect the shift interlock system.