Your Vehicle: 2001 Ford Escort ZX2 L4-2.0L DOHC VIN 3
 
Vehicle » Brakes and Traction Control » Brake Bleeding » Service and Repair » Four Wheel Antilock Brake System Bleeding  
 
 
  Four Wheel Antilock Brake System Bleeding  
 

System Bleed - Anti-Lock Brakes Only

  1. NOTE: Performing the SYSTEM BLEED FUNCTION on the scan tool drives trapped air from the Hydraulic Control Unit (HCU) . Subsequent bleeding removes the air from the brake hydraulic system to the bleeder screws.

NOTE: The engine must be running to provide adequate voltage to the HCU module during the anti-lock control portion of the system bleed.

Connect the scan tool.

  1. Start the engine and depress the brake pedal to half of the full travel position.
  2. Access FUNCTION TEST mode and press the trigger to run the SYSTEM BLEED FUNCTION.
  3. Manually bleed the brake hydraulic system.
  4. Repeat the procedure performing a total of two scan tool cycles and two manual bleed cycles; the bleed procedure is complete.