COOLING FAN
Component Function Check
1.CHECK COOLING FAN FUNCTION
With CONSULT-III
- Turn ignition switch ON.
- Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT-III.
- Check that cooling fan operates at each speed. Without CONSULT-III
- Perform IPDM E/R auto active test and check cooling fan motors operation, refer to See: Power and Ground Distribution\Power Distribution Module\Testing and Inspection\Scan Tool Testing and Procedures\Diagnosis System (IPDM E/R)\Diagnosis Description.
- Check that cooling fan operates at each speed. Is the Inspection result normal?
YES >> Inspection END
NO >> Go to See: Diagnosis Procedure.
|