FINAL DRIVE
Disassembly
- Remove final gear mounting bolts and then separate the final gear from differential case.
- Remove differential side bearing (clutch housing side) using Tool and pullers (B).
Tool number : ST33061000 (J-8107-2)
CAUTION:
Hook a puller on the cage of differential side bearing.
- Remove speedometer drive gear.
- Remove differential side bearing (transaxle case side) using Tool and pullers.
Tool number : ST33061000 (J-8107-2)
CAUTION:
Hook a puller on the inner race of differential side bearing.
- Remove retaining pin from differential case using suitable tool and then remove pinion mate shaft.
- Rotate pinion mate gears and remove pinion mate gears, pinion mate thrust washers, side gears, and side gear thrust washers from differential case.
|