PARKING BRAKE CONTROL
LEVER TYPE : Removal and Installation
REMOVAL
- Remove rear wheel and tires. Refer to See: Maintenance\Wheels and Tires\Service and Repair.
- Remove center console. Refer to See: Body and Frame\Interior Moulding / Trim\Console\Service and Repair\Disassembly And Assembly.
- Disconnect parking brake switch connector.
- Remove adjusting nut and discard. Loosen cable, then disconnect rear cables from equalizer.
CAUTION:
Do not reuse adjusting nut.
- Remove control device assembly nuts and remove control device assembly.
- Remove heat insulator for the exhaust center tube.
- Remove parking brake shoes, and disconnect rear cable from toggle lever. Refer to See: Parking Brake Shoe\Service and Repair\Removal and Installation.
- Remove rear cable bolts and nuts, then remove rear cables.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Do not reuse adjusting nut.
|