Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Powertrain Management » Ignition System » Testing and Inspection » Electrical Load Signal » Component Function Check  
 
 
  Component Function Check  
 

ELECTRICAL LOAD SIGNAL

Component Function Check

1.CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION

  1. Turn ignition switch ON.
  2. Connect CONSULT-III and select "DATA MONITOR" mode.
  3. Select "LOAD SIGNAL" and check indication under the following conditions.

  

Is the Inspection result normal?
YES >> GO TO 2.
NO >> Go to See: Computers and Control Systems\Testing and Inspection\Component Tests and General Diagnostics\Electrical Load Signal\Diagnosis Procedure.
2.CHECK LIGHTING SWITCH FUNCTION
Check "LOAD SIGNAL" indication under the following conditions.

  

Is the Inspection result normal?
YES >> GO TO 3.
NO >> Go to See: Computers and Control Systems\Testing and Inspection\Component Tests and General Diagnostics\Electrical Load Signal\Diagnosis Procedure.
3.CHECK HEATER FAN CONTROL SWITCH FUNCTION
Select "HEATER FAN SW" and check indication under the following conditions.

  

Is the Inspection result normal?
YES >> Inspection END
NO >> Go to See: Computers and Control Systems\Testing and Inspection\Component Tests and General Diagnostics\Electrical Load Signal\Diagnosis Procedure.