TRUNK LID

TRUNK LID ASSEMBLY : Removal and Installation

REMOVAL

1. Remove trunk lid finisher. Refer to See: Trunk / Liftgate Interior Trim Panel\Service and Repair\Removal And Installation\Sedan.
2. Disconnect the connectors in the trunk lid, and remove the harness clips to pull the harness out of the trunk lid.
3. Remove the bolts, and remove the trunk lid assembly.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:

• After installing, apply touch-up paint (the body color) onto the head of the hinge bolts.
• After installing, check operation.
• After installing, perform fitting adjustment. Refer to See: Adjustments\Sedan Without Intelligent Key.