If transaxle assembly is removed from the vehicle, always replace CSC (Concentric Slave Cylinder).Return CSC insert to original position to remove transaxle assembly. Dust on clutch disc sliding parts may damage CSC seal and may cause clutch fluid leakage.
Be careful not to apply any grease to the clutch disc facing, pressure plate surface and flywheel surface.
Loosen clutch cover bolts evenly. Then remove clutch cover and clutch disc.
INSTALLATION
Clean clutch disc and input shaft splines to remove grease and dust caused by abrasion.
Apply recommended grease to clutch disc and input shaft splines.
CAUTION: Be sure to apply grease to the points specified. Otherwise, noise, poor disengagement, or damage to the clutch may result. Excessive grease may cause slip or shudder. If it adheres to CSC seal, it will cause clutch fluid leakage. Wipe off excess grease.