CLUTCH PIPING

Removal and Installation

CAUTION:
Do not spill clutch fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area with water.

REMOVAL

1. Remove the air cleaner and air duct. Refer to See: Engine, Cooling and Exhaust\Engine\Air Filter Element\Service and Repair for QR25DE and See: Engine, Cooling and Exhaust\Engine\Air Filter Element\Service and Repair for VQ35DE.
2. Remove the lock pin and disconnect the clutch master cylinder connector.
3. Remove the clutch tubes from the branch connector.
4. Remove the clutch tube and air bleed connector valve.
5. Remove the branch connector.
6. Remove lock pin and disconnect the CSC connector.

INSTALLATION
Installation is in the reverse order of removal.

• Make sure that all tubes are fully installed into connectors.
• Make sure that all connector lock pins are fully installed.
• After installation, bleed clutch hydraulic system. Refer to See: Clutch Hydraulic System\Service and Repair.