PARKING BRAKE CONTROL

LEVER TYPE : Removal and Installation

REMOVAL

1. Remove rear wheel and tires. Refer to See: Maintenance\Wheels and Tires\Service and Repair.
2. Remove center console. Refer to See: Body and Frame\Interior Moulding / Trim\Console\Service and Repair\Disassembly And Assembly.
3. Disconnect parking brake switch connector.
4. Remove adjusting nut and discard. Loosen cable, then disconnect rear cables from equalizer.

CAUTION:
Do not reuse adjusting nut.

5. Remove control device assembly nuts and remove control device assembly.
6. Remove heat insulator for the exhaust center tube.
7. Remove parking brake shoes, and disconnect rear cable from toggle lever. Refer to See: Parking Brake Shoe\Service and Repair\Removal and Installation.
8. Remove rear cable bolts and nuts, then remove rear cables.

INSTALLATION
Installation is in the reverse order of removal.

• Adjust parking brake. Refer to See: Adjustments\Lever Type.

CAUTION:
Do not reuse adjusting nut.