STEERING WHEEL

Removal and Installation

REMOVAL

NOTE:
When reconnecting spiral cable, fix cable with a tape so that fixing case and rotating part keep aligned. This will omit neutral position alignment procedure during spiral cable installation.

1. Set vehicle to the straight-ahead position.
2. Remove driver air bag module. Refer to See: Restraints and Safety Systems\Air Bag Systems\Air Bag\Service and Repair\Driver Air Bag Module\Removal And Installation.
3. Remove steering wheel lock nut after steering is locked.

4. Remove steering wheel using Tool (A).

Tool number A: ST27180001 (J-25726-A)

INSTALLATION
Installation is in the reverse order of removal.

NOTE:
Align the spiral cable. Refer to See: Restraints and Safety Systems\Air Bag Systems\Clockspring Assembly / Spiral Cable\Service and Repair.