Turn steering wheel so that front wheels come to the straight-ahead position. Start engine and lightly turn steering wheel to the left and right until front wheels start to move. Measure steering wheel movement on the outer circumference.
Steering wheel play : 0 - 35 mm (0 - 1.38 in)
When the measurement value is outside the standard value, check backlash for each joint of steering column assembly and installation condition of steering gear assembly.
NEUTRAL POSITION OF STEERING WHEEL
Make sure that steering gear assembly, steering column assembly and steering wheel are installed in the correct position.
Set vehicle to the straight-ahead position and confirm steering wheel is in the neutral position.
Loosen outer socket lock nut and turn inner socket to left and right equally to make fine adjustments if steering wheel is not in the neutral position.
STEERING WHEEL TURNING FORCE
Park vehicle on a level, dry surface and set parking brake.
Start engine.
Bring power steering fluid up to adequate operating temperature. Make sure the fluid temperature is approximately 60° to 80°C (140° to 176°F) . Tires need to be inflated to normal pressure.
Check steering wheel turning force using tool when steering wheel has been turned 360° from the neutral position.