Wheels/Tires - Hunter GSP9700(R) Set Up Information
Classification: WT11-006
Reference: NTB11-054
Date: May 26, 2011
NISSAN RECOMMENDED SETUP INFORMATION FOR HUNTER GSP9700
APPLIED VEHICLES: All Nissan
SERVICE INFORMATION
The most common cause of vehicle vibration at highway speeds is tire/wheel assembly non-uniformity. There are three primary contributors that affect tire/wheel assembly uniformity:
^
Imbalance
^
Radial run-out
^
Tire Road Force Variation (RFV).
The Hunter GSP9700 has the capability to measure tire Road Force Variation (RFV). When measuring RFV it is important to look at both the RH1 and RH2 values.
Use the instructions below to set your Hunter GSP9700 to the Nissan recommended setting for optimum performance with Nissan wheel/tire assemblies:
INSTRUCTIONS FOR ENTERING NISSAN RECOMMENDED SETTINGS INTO THE HUNTER GSP9700
Information
Enter Setup
Enable SmartWeight Only Balance Mode and ChangeWeightSaver Residual Goal
Enable Prompted Centering Checks
Set Road Force to Display Kilograms
Disable QuickMatch Setting
Set Weight Units to Display Grams
Set Runout & RoadForce Limits and Limits Multiplier for LT Tires and P/SUV Tires
