Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Instrument Panel, Gauges and Warning Indicators » Testing and Inspection » Component Tests and General Diagnostics » Washer Level Switch Signal Circuit » Diagnosis Procedure  
 
 
  Diagnosis Procedure  
 

WASHER LEVEL SWITCH SIGNAL CIRCUIT

Description

Transmits the washer level switch signal to the combination meter.

WASHER LEVEL SWITCH SIGNAL CIRCUIT

Diagnosis Procedure

1.CHECK WASHER LEVEL SWITCH SIGNAL CIRCUIT

  

  1. Turn ignition switch OFF.
  2. Disconnect combination meter connector and washer level switch connector.
  3. Check continuity between combination meter harness connector M24 (A) terminal 29 and washer level switch harness connector

E208 (B) terminal 1.

29 - 1 : Continuity should exist.

  1. Check continuity between combination meter harness connector M24 (A) terminal 29 and ground.

29 - Ground : Continuity should not exist.

Is the Inspection result normal?
YES >> GO TO 2
NO >> Repair harness or connector.
2.CHECK WASHER LEVEL SWITCH GROUND CIRCUIT

  

Check continuity between washer fluid level switch harness connector E208 terminal 2 and ground.

2 - Ground : Continuity should exist.

Is the Inspection result normal?
YES >> Inspection End.
NO >> Repair harness or connector.