THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT DISPLAY
Description
The door ajar warning is displayed even though all of the doors and the trunk are closed.
The door ajar warning is not displayed even though a door or the trunk is ajar. THE DOOR OPEN WARNING CONTINUES DISPLAYING, OR DOES NOT DISPLAY
Diagnosis Procedure
1.CHECK BCM INPUT SIGNAL
Connect CONSULT-III and check the BCM input signals. Refer to the following:
YES >> GO TO 2
NO >> GO TO 3
2.CHECK COMBINATION METER INPUT SIGNAL
Select "METER/M&A" on CONSULT-III.
Monitor "DOOR W/L" and "TRUNK/GLAS-H" of "DATA MONITOR" while opening and closing doors and trunk.
Is the Inspection result normal?
YES >> Replace combination meter. Refer to See: Instrument Cluster / Carrier\Service and Repair\Removal and Replacement .
NO >> Replace BCM. Refer to See: Body and Frame\Body Control Systems\Body Control Module\Service and Repair .
3.CHECK DOOR SWITCH SIGNAL CIRCUIT
Check the door switch signal circuit. Refer to the following:
YES >> GO TO 4
NO >> Repair harness or connector.
4.CHECK DOOR SWITCH UNIT
Perform a unit check for the door switch. Refer to the following:
YES >> GO TO 5
NO >> Replace door switch .
5.CHECK TRUNK LAMP SWITCH AND TRUNK RELEASE SOLENOID SIGNAL CIRCUIT
Check the trunk lamp switch and trunk release solenoid signal circuit. Refer to the following:
YES >> GO TO 6
NO >> Repair harness or connector.
6.CHECK TRUNK LAMP SWITCH AND TRUNK RELEASE SOLENOID UNIT
Perform a unit check for the trunk lamp switch and trunk release solenoid. Refer to the following:
YES >> Replace combination meter. Refer to See: Instrument Cluster / Carrier\Service and Repair\Removal and Replacement .
NO >> Replace trunk lamp switch and trunk release solenoid.