Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Body and Frame » Technical Service Bulletins » All Technical Service Bulletins » Interior - Front Seat Side Finisher Removal Procedure  
 
 
  Interior - Front Seat Side Finisher Removal Procedure  
 

Classification: BT11-002

Reference: NTB11-009

Date: February 9, 2011

2007 -2011 ALTIMA SEDAN;
FRONT SEAT SIDE FINISHER REMOVAL

APPLIED VEHICLES:
2007-2011 Altima Sedan (L32)
2007-2011 Altima Hybrid (L32HV)

IF YOU CONFIRM

  

^ A front seat outboard side finisher needs to be removed for any reason.

ACTION

Follow the Service Procedure in this bulletin for removal.

IMPORTANT:
The purpose of "ACTION" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure as it contains information that is essential to successfully completing this repair.

SERVICE PROCEDURE

  
  

1. Remove adjustment knobs or lever (see Figures 2 and 3).

^ For manual seat - remove the adjustment lever

^ For power seats - remove the adjustment knobs.

If needed, use a plastic trim tool.

  

2. Remove the screw at the rear of the finisher.

  

3. Insert a clean medium size flat blade screw driver between the seat cushion and the finisher as shown in Figure 5.

4. Release metal clip by pushing on the finger (see Figure 6).

  

5. Unsnap/unclip the rest of the finisher as shown in Figure 7.