Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Technical Service Bulletins » Superceded Bulletins » Lighting - Exterior Lamps Fogging Information  
 
 
  Lighting - Exterior Lamps Fogging Information  
 

Classification: EL03-030d

Reference: NTB03-074d

Date: August 8, 2008

EXTERIOR LAMP FOGGING

This bulletin has been amended to apply to all current production models. Please discard all earlier versions.

APPLIED VEHICLES:
2001-2009 Nissan, All Models

SERVICE INFORMATION:

Occasionally customers may notice water in the exterior lamps. This is generally NOT due to a defect.

The following information, illustrations, and flow chart are provided to help you in determining if this incident for water/condensation in the lamps is normal or not.

All current exterior lamp assemblies are vented to the atmosphere (not sealed).

^ This is necessary to allow for expansion and contraction of air from temperature "variations" (warmer or colder) without damage to the lamp.

^ Moisture in the air sometimes "travels" into and out of the lamp assembly through these vents.

^ Certain environmental conditions may cause moisture to condense.

^ The fogging/cloudiness should disappear over time when the lamp is in a dry environment.

  

Fog may temporarily form inside the lens of the exterior lights based on environmental conditions or sudden temperature changes, such as a car wash, may cause. This is normal. See Figure 1.

NOTE: This condensation can appear anywhere on the outer lens, typically at its coldest location.

  

If the moisture trickles, drips, or pools, it may not be considered normal and the lamp assembly may have a water leak path. See Figure 2 for an example. If large drops of water collect inside the lens, refer to the flow chart below to find the next step.

  

SERVICE PROCEDURE

  

Disclaimer