Classification: EL09-011
Reference: NTB09-030
Date: April 6, 2009
ELECTRONIC CONTROL UNIT DAMAGE CAN RESULT FROM IMPROPER BATTERY CONNECTION
APPLIED VEHICLES:
All Nissan
SERVICE INFORMATION
| ^ |
The vehicle 12 volt battery is an important part of the vehicle electrical system and is required to stay connected when the engine is running.
|
| ^ |
To prevent damage to vehicle electronic components follow the instructions / cautions below.
|
IMPORTANT:
Damage to electronic components (ECM, TCM, BCM, etc.) due to improper battery connection will not be covered under warranty.
CAUTION:
| ^ |
Make sure the ignition is OFF during battery service and replacement.
| ^ |
Do not disconnect or connect any battery cables while the ignition switch is turned ON.
| ^ |
When disconnecting a battery, always disconnect the negative cable first.
| ^ |
When connecting a battery, always connect the positive cable first.
| ^ |
Do not leave a battery cable loose. Tighten battery cables immediately after attachment.
| ^ |
If a battery cable is loose, do not operate any electrical loads. (This includes turning the ignition ON, starting the engine, operating accessories such as the A/C system, power seats, interior lights, exterior lights etc.).
|
|
|
|
|
|
|
