B260F ENGINE STATUS
Description
BCM receives the engine status signal from ECM via CAN communication.
DTC Logic
DTC DETECTION LOGIC
NOTE:
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
- Turn ignition switch ON under the following conditions.
- CVT selector lever is in the P position.
- Do not depress the brake pedal.
- Check "Self diagnostic result" with CONSULT-III. Is DTC detected?
YES >> Refer to Diagnosis Procedure.
NO >> Inspection End.
Diagnosis Procedure
1.Inspection START
- Turn ignition switch ON.
- Check "Self diagnostic result" with CONSULT-III.
- Touch "ERASE".
- Perform DTC Confirmation Procedure. See DTC Logic.
Is the DTC B260F displayed again?
YES >> GO TO 2
NO >> Inspection End.
2.REPLACE ECM
- Replace ECM.
- Refer to (QR25DE except California) or (QR25DE California). >> Inspection End.
|