B2619 BCM
Description
BCM requests IPDM E/R to supply power to steering lock unit. After receiving the power, the steering lock unit transmits an ON signal to BCM.
DTC Logic
DTC DETECTION LOGIC
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
Press the push-button ignition switch under the following conditions and wait for at least 1 second.
CVT selector lever is in the P position
Do not depress brake pedal
Check "Self diagnostic result" with CONSULT-III. Is DTC detected? YES >> Refer to Diagnosis Procedure.
NO >> Inspection End.
Diagnosis Procedure
1.Inspection START
Turn ignition switch ON.
Check "Self diagnostic result" with CONSULT-III.
Touch "ERASE".
Perform DTC Confirmation Procedure. See DTC Logic. Is the DTC B2619 displayed again?
YES >> Replace BCM. Refer to See: Body and Frame\Body Control Systems\Body Control Module\Service and Repair .
NO >> Inspection End.