DTC C1154 PNP POS SIG

Description
The park/neutral position switch signal is transmitted to the ABS actuator and electric unit (control unit) using the CAN communication lines.

DTC Logic

DTC DETECTION LOGIC

• Replace ABS actuator and electric unit (control unit). Refer to See: Brakes and Traction Control\Antilock Brakes / Traction Control Systems\Hydraulic Control Assembly - Antilock Brakes\Service and Repair\VDC/TCS/ABS\Removal And Installation.
• Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED". NO >> GO TO 2

2.CHECK PARK/NEUTRAL POSITION (PNP) SWITCH
Perform Park/Neutral position switch Inspection. Refer to See: P Code Charts\P0705\CVT RE0F09B.
Is the Inspection result normal?
YES >>

• Replace ABS actuator and electric unit (control unit). Refer to See: Brakes and Traction Control\Antilock Brakes / Traction Control Systems\Hydraulic Control Assembly - Antilock Brakes\Service and Repair\VDC/TCS/ABS\Removal And Installation.
• Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED". NO >>
• Repair or replace malfunctioning components.
• Perform the self-diagnosis, and make sure that the result shows "NO DTC IS DETECTED".