ROCKER COVER
Removal and Installation LH
REMOVAL
- Remove the engine cover, using power tool.
- Remove front air duct.
- Remove blow by hose from rocker cover.
- Remove camshaft position sensor.
CAUTION:
- Handle carefully to avoid dropping and shocks.
- Do not disassemble.
- Do not allow metal powder to adhere to magnetic part at sensor tip (A).
- Do not place sensors in a location where they are exposed to magnetism.
- Disconnect the ignition coil connectors.
- Remove the ignition coils. Refer to See: Powertrain Management\Ignition System\Ignition Coil\Service and Repair\Removal And Installation LH.
CAUTION:
Never shock ignition coils.
- Remove LH rocker cover bolts from cylinder head as shown.
Arrow Indicates Front
INSTALLATION
Installation is in the reverse order of removal.
Tool number : WS39930000 ( - )
- Tighten the rocker cover bolts in two steps in the order as shown.
Arrow Indicates Front
|