SPARK PLUG
Removal and Installation
REMOVAL
- Remove the ignition coil. Refer to See: Powertrain Management\Ignition System\Ignition Coil\Service and Repair\Removal And Installation LH and See: Powertrain Management\Ignition System\Ignition Coil\Service and Repair\Removal And Installation RH.
- Remove the spark plug with a suitable spark plug wrench.
Inspection AFTER REMOVAL
- Do not use a wire brush for cleaning the spark plugs. Replace as necessary.
- If plug is covered with carbon, a spark plug cleaner may be used.
- Checking and adjusting plug gap is not required between change intervals. If the gap is out of specification, replace the spark plug.
INSTALLATION
Installation is in the reverse order of removal.
|
