HAZARD FUNCTION

Description

Perform answer-back for each operation with number of blinks.

HAZARD FUNCTION

Diagnosis Procedure

1.CHECK HAZARD SWITCH CIRCUIT
Operate the hazard lights by turning ON the hazard warning switch.
Is the Inspection result normal?
YES >> GO TO 2
NO >> Repair or replace hazard warning switch circuit. Refer to See: Lighting and Horns\Testing and Inspection\Initial Inspection and Diagnostic Overview\Work Flow\Exterior Lighting System.
2.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection End.