POWER WINDOW MOTOR
PASSENGER SIDE : Description
Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or power window and door lock/unlock switch RH.
POWER WINDOW MOTOR
PASSENGER SIDE : Diagnosis Procedure
Front Power Window Motor RH Circuit Check
- CHECK FRONT POWER WINDOW SWITCH RH OUTPUT SIGNAL
- Disconnect front power window motor RH.
- Turn ignition switch ON.
- Check voltage between front power window motor RH connector and ground.
Is the measurement value within the specification?
YES >> GO TO 2
NO >> Replace power window and door lock/unlock switch RH. Refer to See: Power Window Switch\Service and Repair\LH & RH Front Anti-Pinch-Sedan. After that, refer to See: Programming and Relearning\Power Window Motor\Passenger Side\LH & RH Front Anti-Pinch-Sedan.
- CHECK HARNESS CONTINUITY
- Turn ignition switch OFF.
- Disconnect power window and door lock/unlock switch RH.
- Check continuity between power window and door lock/unlock switch RH connector (A) and front power window motor RH connector (B).
- Check continuity between power window and door lock/unlock switch RH connector (A) and ground.
Is the Inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness.
- CHECK FRONT POWER WINDOW MOTOR RH Check front power window motor RH. Refer to See: Component Inspection\LH & RH Front Anti-Pinch-Sedan.
Is the Inspection result normal?
YES >> Check intermittent incident. Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
NO >> Replace front power window motor RH. Refer to See: Front Door Window Regulator\Service and Repair\Removal and Replacement. After that, refer to See: Programming and Relearning\Power Window Motor\Passenger Side\LH & RH Front Anti-Pinch-Sedan.
|