G SENSOR
Removal and Installation
CAUTION:
- Do not drop or strike the yaw rate/side G sensor, because it has little endurance to impacts.
- Do not use power tools, because yaw rate/side G sensor is sensitive to impacts.
- For installation, make sure the arrow on top of the yaw rate/side G sensor is pointing to the front of the vehicle.
REMOVAL
- Remove the center console. Refer to See: Body and Frame\Interior Moulding / Trim\Console\Service and Repair\Exploded View.
- Disconnect the yaw rate/side G sensor harness connector.
- Remove the yaw rate/side G sensor nuts. Remove the yaw rate/side G sensor.
INSTALLATION
Installation is in the reverse order of removal.
- For installation, make sure the arrow on top of the yaw rate/side G sensor is pointing to the front of the vehicle.
- Arrow Indicates Front of vehicle.
|