Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Steering and Suspension » Technical Service Bulletins » All Technical Service Bulletins » Wheels/Tires - Hunter GSP9700(R) Set Up Information  
 
 
  Wheels/Tires - Hunter GSP9700(R) Set Up Information  
 

Classification: WT11-006

Reference: NTB11-054

Date: May 26, 2011

NISSAN RECOMMENDED SETUP INFORMATION FOR HUNTER GSP9700

APPLIED VEHICLES: All Nissan

SERVICE INFORMATION

The most common cause of vehicle vibration at highway speeds is tire/wheel assembly non-uniformity. There are three primary contributors that affect tire/wheel assembly uniformity:

^ Imbalance

^ Radial run-out

^ Tire Road Force Variation (RFV).

The Hunter GSP9700 has the capability to measure tire Road Force Variation (RFV). When measuring RFV it is important to look at both the RH1 and RH2 values.

Use the instructions below to set your Hunter GSP9700 to the Nissan recommended setting for optimum performance with Nissan wheel/tire assemblies:

INSTRUCTIONS FOR ENTERING NISSAN RECOMMENDED SETTINGS INTO THE HUNTER GSP9700

  

Information

  

Enter Setup

  

Enable SmartWeight Only Balance Mode and ChangeWeightSaver Residual Goal

  

Enable Prompted Centering Checks

  

Set Road Force to Display Kilograms

  

Disable QuickMatch Setting

  

Set Weight Units to Display Grams

  
  

Set Runout & RoadForce Limits and Limits Multiplier for LT Tires and P/SUV Tires

  

Verify Settings