B2618 BCM
Description
BCM controls the various electrical components and simultaneously supplies power according to the power supply position.
BCM checks the power supply position internally.
DTC Logic
DTC DETECTION LOGIC
NOTE:
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
Turn ignition switch ON under the following conditions, and wait for at least 1 second.
CVT selector lever is in the P or N position
Release brake pedal
Check "Self diagnostic result" with CONSULT-III. Is DTC detected? YES >> Go to Diagnosis Procedure.
NO >> Inspection End.
Diagnosis Procedure
Inspection START
Turn ignition switch ON.
Select "Self diagnostic result" mode with CONSULT-III.
Touch "ERASE".
Perform DTC Confirmation Procedure. See DTC Logic. Is the 1st trip DTC B2618 displayed again?
YES >> Replace BCM. Refer to See: Body and Frame\Body Control Systems\Body Control Module\Service and Repair .
NO >> Inspection End.