ASCD INDICATOR

Description

The ASCD operation status is indicated by two indicators, (CRUISE and SET on the information display) on the combination meter.
CRUISE indicator is displayed to indicate that ASCD system is ready for operation when MAIN switch on ASCD steering switch is turned ON.
SET indicator is displayed when the following conditions are met.

• CRUISE indicator is displayed.
• SET/COAST switch on ASCD steering switch is turned ON while vehicle speed is within the range of ASCD setting. SET indicator is displayed during ASCD control.

Refer to See: Cruise Control\Description and Operation\System Description for the ASCD function.

ASCD INDICATOR

Diagnosis Procedure

1.CHECK DTC
Check that DTC UXXXX is not displayed.
Is the Inspection result normal?
YES >> GO TO 2.
NO >> Perform trouble diagnosis for DTC UXXXX.
2.CHECK COMBINATION METER OPERATION
Refer to See: Instrument Panel, Gauges and Warning Indicators\Testing and Inspection\Scan Tool Testing and Procedures\CONSULT-III Function.
Is the Inspection result normal?
YES >> GO TO 3.
NO >> Check combination meter circuit. Refer to See: A L L Diagnostic Trouble Codes ( DTC )\Testing and Inspection\U Code Charts\U1001.
3.CHECK INTERMITTENT INCIDENT
Refer to See: Testing and Inspection\Initial Inspection and Diagnostic Overview\Service Information For Electrical Incident\Intermittent Incident.
>> Inspection END