Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Powertrain Management » Computers and Control Systems » Testing and Inspection » Component Tests and General Diagnostics » Variable Induction Air System » Component Function Check  
 
 
  Component Function Check  
 

VARIABLE INDUCTION AIR SYSTEM

Component Function Check

1.CHECK OVERALL FUNCTION-I
With CONSULT-III

  1. Start engine and warm it up to the normal operating temperature.
  2. Perform "VIAS S/V-1" in "ACTIVE TEST" mode with CONSULT-III.
  3. Turn VIAS control solenoid valve 1 ON and OFF, and check that power valve actuator 1 rod moves.

  

Without CONSULT-III

  1. Start engine and warm it up to the normal operating temperature.
  2. Rev engine quickly up to approximately 5,000 rpm.
  3. Check that power valve actuator 1 rod moves.

  

Is the Inspection result normal?
YES >> GO TO 2.
NO >> See: Diagnosis Procedure.
2.CHECK OVERALL FUNCTION-II
With CONSULT-III

  1. Perform "VIAS S/V-2" in "ACTIVE TEST" mode with CONSULT-III.
  2. Turn VIAS control solenoid valve 2 ON and OFF, and check that power valve actuator 2 rod moves.

  

Without CONSULT-III

  1. When revving engine up to 5,000 rpm quickly.
  2. Rev engine quickly up to approximately 5,000 rpm.
  3. Check that power valve actuator 2 rod moves.

  

Is the Inspection result normal?
YES >> Inspection END
NO >> See: Diagnosis Procedure.