Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Powertrain Management » Computers and Control Systems » Testing and Inspection » Component Tests and General Diagnostics » Electronic Controlled Engine Mount » Component Function Check  
 
 
  Component Function Check  
 

ELECTRONIC CONTROLLED ENGINE MOUNT

Component Function Check

1.CHECK OVERALL FUNCTION

  1. Start engine and warm it up to normal operating temperature.
  2. Shift selector lever to D position (CVT) or 1st position (M/T) while depressing the brake pedal and parking brake pedal.
  3. Disconnect electronic controlled engine mount control solenoid valve harness connector.
  4. Check that body vibration increases compared to the condition of step 2 above (with vehicle stopped). Is the Inspection result normal?

YES >> Inspection END
NO >> See: Diagnosis Procedure.