CONTROL VALVE
Inspection and Adjustment
Inspection AFTER REMOVAL
Check oil pan for foreign material.
- If a large amount of worn material is found, clutch plate may be worn.
- If iron powder is found, bearings, gears, or clutch plates may be worn.
- If aluminum powder is found, bushing may be worn, or chips or burrs of aluminum casting parts may enter. Check points where wear is found in all cases.
Inspection AFTER REMOVAL
Check the CVT fluid level and leakage. Refer to See: Fluid - CVT\Service and Repair\CVT RE0F10A.
Inspection AFTER INSTALLATION
Erase the TCM data.
|