INPUT SHAFT AND GEAR
Disassembly
- Before disassembling, measure end play for 3rd, 4th, 5th, and 6th input gears.
End play standard value : Refer to See: Specifications\Mechanical\End Play.
- Remove oil channel.
- Press out input shaft rear bearing using Tool and a puller.
Tool number : ST33052000 ( - )
- Remove snap ring.
- Press out 6th input gear, 6th needle bearing, 6th input gear bushing, 5th-6th synchronizer hub assembly, and 5th input gear using Tool (A) and a puller (B).
Tool number : ST33052000 ( - )
- Remove 5th needle bearing.
- Press out 5th input gear bushing, thrust washer, 4th input gear, 4th needle bearing, 4th input gear bushing, 3rd-4th synchronizer hub assembly, and 3rd input gear using Tool and a puller.
Tool number : ST33052000 ( - )
- Remove 3rd needle bearing.
- Press out input shaft front bearing using a puller.
|