Your Vehicle: 2009 Nissan-Datsun Altima V6-3.5L (VQ35DE)
 
Vehicle » Transmission and Drivetrain » Manual Transmission/Transaxle » Seals and Gaskets » Service and Repair  
 
 
  Service and Repair  
 

SIDE OIL SEAL

Removal and Installation

REMOVAL

  1. Remove the drive shaft. Refer to See: Drive Axles, Bearings and Joints\Axle Shaft Assembly\Service and Repair\Removal and Installation (Left Side), See: Drive Axles, Bearings and Joints\Axle Shaft Assembly\Service and Repair\Removal and Installation (Right Side).

  

  1. Remove oil seal using suitable tool.

CAUTION:
Do not damage the transaxle case surface when removing oil seal.

INSTALLATION

  1. Drive the oil seal straight into the transaxle case and clutch housing to the specified dimension "A" using Tools.

  

  

CAUTION:
Do not reuse oil seal.

  1. Install the drive shaft. Refer to See: Drive Axles, Bearings and Joints\Axle Shaft Assembly\Service and Repair\Removal and Installation (Left Side), See: Drive Axles, Bearings and Joints\Axle Shaft Assembly\Service and Repair\Removal and Installation (Right Side).
  2. Check the transaxle fluid level. Refer to See: Fluid - M/T\Service and Repair\Inspection.