CLUTCH PIPING
Removal and Installation
CAUTION:
Do not spill clutch fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area with water.
REMOVAL
- Remove the air cleaner and air duct. Refer to See: Engine, Cooling and Exhaust\Engine\Air Filter Element\Service and Repair for QR25DE and See: Engine, Cooling and Exhaust\Engine\Air Filter Element\Service and Repair for VQ35DE.
- Remove the lock pin and disconnect the clutch master cylinder connector.
- Remove the clutch tubes from the branch connector.
- Remove the clutch tube and air bleed connector valve.
- Remove the branch connector.
- Remove lock pin and disconnect the CSC connector.
INSTALLATION
Installation is in the reverse order of removal.
|